4-line guide wave radar material level meter
Brand HENGHE
Certification N/A
The guide wave radar liquid level meter is manufactured with advanced micro-processor and unique EchoDiscovery echo processing technology, aluminum die casting enclosure, and electronic parts are of full rubber sealing structure, and are suitable for complicated operating conditions and continuous material level measurement of explosive-proof flammable media. Mai features: 1. Due to use of advanced micro-processor and unique EchoDiscovery echo processing technology, the guide wave radar material level meter is used for kinds of complicated operating conditions 2. Composition of various process connection methods and detecting assemblies make the guide wave radar liquid level meter suitable for complicated operating conditions and application sites. Such as: high temperature, high pressure, low media and electric constant media 3. Pulse operating mode is adopted, and the guide wave radar material level meter transmission power is low, installed in various metallic and non-metallic containers, harmless to human body and environment.
Technical Parameters:
1. Maximum range: cable: 30m rod: 6m 2. Accuracy: ±10mm 3. Process temperature: 40-150℃ 4. Process pressure: -0.1-4MPa 5. Signal output: 4-20mA/HART 6. Power supply: 2-wire system, 4-wire system
Recommendations
12.5mm Speeder Handle
BrandSHEFFIELD
Suction Pump Accessories-internal Thread Plunger Connector
BrandPYZS
Tubing Subsurface Pump
BrandBAOSHI
K344-94 Fracturing Packer
BrandZHAOXIN
Power Tong Accessories | Die, P/N: 01.01-27M | ZQ203-100
BrandRUSHI
2" NPS Pipe Cap
BrandYSDLGJ
Bits Handle
BrandENDURA
5000PSI AA PCP Wellhead
BrandLIWEN
Drilling Line∣6*19S-IWRC-EEIP-sZ, Lubricated, Uncoated Finish
BrandJ&L
Oil Seal of Input Shaft, 95x130x12 | Agitator HA-18.5
BrandTSC
20000PSI, 4-1/16 '' Christmas Tree
BrandLIWEN
Power Tong | Casing Power Tong|TQ178-16|4~7
BrandRUSHI
Worm Shaft, P/N: TWPX200-10 | Agitator HA-11/HA11-2/HA-15/HA15-2 Gear Box Parts
BrandTSC
Rubber & Plastic Handled Screwdriver Slotted
BrandENDURA
10" Aviation Tin Snips (Right Elbow)
BrandSHEFFIELD
Power Tong | Drill Pipe Power Tong|ZQ216-135II|3-1/2~8-1/2
BrandRUSHI
Torx Screwdriver
BrandENDURA
2000PSI FF Water Injection Wellhead
BrandLIWEN