Aluminum two cavities shell pulse type radar level meter
Brand HENGHE
Certification N/A
The radar level meter antenna emits extremely narrow microwave pulse, and such pulse could be transmitted in space at light speed, when it contacts the surface of the medium being tested, part of energy will be reflected, and received by the same antenna. The time interval between emitting pulse and receiving pulse is proportional to the distance from the antenna to the surface of the tested medium. For the extremely high transmission speed of electromagnetic waves, the time interval between emitting pulse and receiving pulse is very small (nanosecond level), so it is hard to ascertain. The GDRD5X series radar level meter adopts a special related demodulation technology, and could identify the time interval between remitting pulse and receiving pulse accurately, so as to further calculate the distance from the antenna to the surface of the tested medium. Characteristics The radar level meter adopts an emitting frequency up to 26GHz, so it possesses: 1. Small beam angle, concentrated energy, and strong anti-interference ability, which has greatly improved accuracy and reliability of measurement; 2. Small size of the antenna is also convenient for installation and addition of antenna protective devices such as dust cover etc.; 3. Smaller measurement blind area, achieves better measurement effect for small tanks.
Technical Parameters:
1. Max. range: 30m 2. Measurement accuracy: ±10mm 3. Process temperature: (-40-120)℃ 4. Process pressure: (-0.1-0.3) MPa 5. Frequency range: 6GHz
Recommendations
Power Tong | Drill Pipe Power Tong|ZQ216-135II|3-1/2~8-1/2
BrandRUSHI
Power Tong | Casing Power Tong|TQ178-16|4~7
BrandRUSHI
Worm Shaft, P/N: TWPX200-10 | Agitator HA-11/HA11-2/HA-15/HA15-2 Gear Box Parts
BrandTSC
Power Tong Accessories | Die, P/N: 01.01-27M | ZQ203-100
BrandRUSHI
K344-94 Fracturing Packer
BrandZHAOXIN
Aviation Snips-Left Cut
BrandENDURA
Rotating Shaft Assembly, P/N: HNJ5.5-02 | Agitator HA-5.5
BrandTSC
Hoisting Tools | “Y” Series Slip Type Casing Elevator|MYC Type 125 STON|3-1/2~7 IN
BrandRUTONG
10" Aviation Tin Snips (Right Elbow)
BrandSHEFFIELD
Oil Seal of Input Shaft, 50x80x12 | Agitator HA-2.2
BrandTSC
Suction Pump Accessories-internal Thread Plunger Connector
BrandPYZS
12.5mm Speeder Handle
BrandSHEFFIELD
Grip Tools | Model E Pneumatic Tubing Spider | 175 STON | 2-3/8~7-5/8 IN
BrandRUTONG
Hoisting Tools | SLX Series Casing Elevators|150 STON|5-1/2~20 IN
BrandRUTONG
Suction Pump Accessories-pump Barrel Upper Joint
BrandPYZS
5/16"Dr. 70L Slotted Bits
BrandENDURA
Piston Nut, P/N: 1133856 |MP-5/MP8/MP10/MP13/MP16
BrandKERUI
2000 PSI FF Electric Pump Wellhead
BrandLIWEN