Continuous Gem Bearing Flow Meter
Brand WELL-SUN
Certification N/A
1. The mechanical body of gem bearing flow meter adopts gem as the support for both ends of the turbine shaft, reducing start displacement, and improving sensitivity of the instrument. One characteristics of the instrument is firm and durable, it is because the housing design provides sound protection for turbine. The instrument adapts to different well deviations. 2. Applied in: Water injection profile logging, operating in sand control net/sand control liner, high velocity wells, and output profile logging.
Technical Parameters:
1. Temperature: 175℃ (350℉) 2. Pressure: 15000psi (103MPa). 3. Output: 10 pulses/revolution, directed. 4. Start valve value: Water: 1.67m/min (5.5ft/min). Light oil: 1.82m/min (6.0ft/min). Heavy oil: 3.04m/min (10ft/min). Air: 4.72m/min (15.5ft/min). 5. Max. flow rate: 609.6m/min (2000 ft/min)
Recommendations
9*12mm Rectangular Open End Fitting
BrandENDURA
Running and Retrieving Tool for VR Plug
BrandSHENKAI
7" Tin Snips
BrandSHEFFIELD
3-1/2"NPS Butt Welded Equal-diameter Tee
BrandYSDLGJ
27x36mm Rectangular Ring End Fitting
BrandENDURA
Suction Pump Accessories-valve Cover
BrandPYZS
Bladder Assy, P/N:AK4535020400 |BOMCO F-500/F-800
BrandKERUI
Rubber Hammer
BrandENDURA
3 1/2” NPS Pipe Cap
BrandYSDLGJ
28pcs. Thread Taps Set
BrandENDURA
Cast Steel Lift Check Valve
BrandCD
Suction Pump Accessories-pump Barrel Closed Valve Cover
BrandBAOSHI
Medium Plate Clamp
BrandJ&L
20-106RHBC Rod Pump
BrandFUQIAO
KS021546-Safety Shoes
BrandKANGSHIELD
Mud Pump Valve Spring
BrandKERUI
3/4" Dr. Extention Bar
BrandENDURA
(Carbon Steel) No Leakage WaferCheck Valve
BrandCD