Low one-time investment, high pump efficiency, energy saving, low maintenance cost, adapt to high sand well, etc.
Brand Subtor
Certification
Lead Time 30days
Guarantee Period 12months
Source of Supply Hebei
Payment Method T/T L/C
1. The principle of downhole screw pump
The stator and rotor are connected to the ends of the oil pipe and the sucker rod. The surface driving equipment drives the rotor to rotate through the sucker rod, and lifts the downhole liquid to the surface.
2. Technical characteristics of downhole screw pump
• Less one-time investment
Compared with electric submersible pumps, hydraulic piston pumps and beam pumping units, the downhole screw pump has a simple structure and the lowest one-time investment.
• High pump efficiency, energy saving, low maintenance cost
The load is stable during operation, the mechanical loss is small, the pump efficiency can reach 55% to 65%, and the highest can reach 75%, while the plunger pumping unit and centrifugal electric submersible pump are only 30% to 40%.
• Simple equipment structure
Small size, low transportation cost; simple ground installation, small footprint, easy installation and maintenance.
• Suitable for heavy oil mining
Generally speaking, the downhole screw pump is suitable for crude oil production with viscosity below 8000mPa.s, so most heavy oil wells can be applied
• Adapt to high sand wells.
Due to the good tolerance of the stator rubber, it can be used in oil wells with high sand content.
• Adapt to high gas wells
The downhole screw pump does not cause air lock, so it is more suitable for oil and gas mixed transmission, but the free gas at the entrance of the downhole pump will affect the volumetric efficiency.
• Suitable for offshore oilfield cluster well groups and horizontal wells
Downhole screw pump can be installed in the inclined straight section, and the equipment structure is simple, the area is small, the transportation and maintenance cost is low, so it is suitable for offshore oil production.
Recommendations
Makeup and Breakout Tools | Manual Tong Type HT55 W/LG. Lever|3-1/2"~13-3/8"|55000 Ft.Lbs
BrandRUTONG
Makeup and Breakout Tools | Manual Tong Type SDD|4"~17"|135kN.m
BrandRUTONG
Injection Safety Shoes4
BrandKANGSHIELD
Shale Shaker Screen Fits Kem-Tron KTL 28 shaker| Metal Frame|API 20~API 325
BrandKERUI
Four Legs Pressed Steel Wire Rope Sling
BrandJ&L
4pcs. Pliers Tool Kit
BrandENDURA
58 Pc Tool Set
BrandSHEFFIELD
NPS10 CL300 Blind Flange
BrandRUNYANG
Packing, P/N: SZB-8-12 | HV240/HV1200 Degaser
BrandTSC
Nominal Pressure Level Cast Steel Gate Valve
BrandCD
3-WEB Valve Assy. |Urethane Insert|API-7
BrandKERUI
DJFY-5×16 Electric Winch
BrandJULING
CL Series Fishing Magnet│ Type A│ Type B
BrandSHUANGJIA
3/4" Dr. Socket Set
BrandENDURA
KS021510 Injection Safety Shoes
BrandKANGSHIELD
Long Radius 90 ° Elbow
BrandYSDLGJ
KV152402 Cowhide Work Gloves
BrandKANGSHIELD
Adjustable WrenchH
BrandENDURA