Drilling Line∣6*19S-IWRC-EIP-sZ, Lubricated, Uncoated Finish
Drilling Line∣6*19S-IWRC-EIP-sZ, Lubricated, Uncoated Finish
Brand J&L
Certification
Lead Time 45days
Guarantee Period 12months
Source of Supply Hebei
Payment Method T/T L/C
Product Information
6×26 (1-5-5F-10) WS – IWRC Galvanized Steel Wire Rope
6×26 is a flexible general engineering wire rope readily available in galvanised, ungalvanised and marine grade stainless steel. The wire rope has an equal lay construction (warrington seale) and achieves a superior breaking load to the 6×19 construction range. The construction has been designed to give a flexible rope with a good fatigue life. A 6×26 wire rope is available with either FC (fibre core) or IWRC (independent wire rope core) and is used for a wide range of applications, examples of which are shown below.
Applications
Holding and closing ropes for grab cranes
General engineering applications
Wire rope slings
Crane ropes
Winch ropes
Hoist rope
Wire rope rigging applications
Lifeboat falls
Mooring ropes
Pursing wires
Luffing ropes
Tow ropes
For tubing line.
6 × 26 strands.
Excellent crush and fatigue resistance.
Increased inner wire number for high stability.
Independent wire rope core.
Recommendations
20-175RHBM Rod Pump
BrandFUQIAO
32 Pc Tool Set
BrandSHEFFIELD
Oil Seal of Output Shaft, 75x105x12 ｜ Agitator HA-11/HA11-2/HA-15/HA15-2
BrandTSC
Swan Hook
BrandJ&L
3-1/2"NPS Butt Welded Equal-diameter Tee
BrandYSDLGJ
FKQ320-5 Remote Control Device of Ground Blowout Preventer
BrandSHENKAI
Go Through Screwdriver Slotted
BrandENDURA
QYZ Hydraulic Drilling Jar
BrandSHUANGJIA
1/4"Dr. Double End Bits
BrandENDURA
Upper Impeller Assembly, P/N: HNJ5.5-03 ｜ Agitator HA-5.5
BrandTSC
3/4” NPS Pipe Cap
BrandYSDLGJ
BOMCO F-500 Mud Pump Fluid End Accessories_Inch
BrandKERUI
Suction Pump Accessories-plunger Upper Valve Cover
BrandPYZS
Suction Pump Accessories-valve Cover
BrandBAOSHI
Rotating Shaft Assembly, P/N: HNJ4-02 ｜ Agitator HA-4
BrandTSC
Suction pump accessories-pump barrel coupling
BrandPYZS
Rotating Shaft Assembly, P/N: HNJ7.5-03 ｜ Agitator HA-7.5/HA7.5-2
BrandTSC
Urethane Bonded Pistons｜Sizes in Millimeters｜With Piston Bore 38.1mm
BrandKERUI
