ERFS-1 sand inhibitor can well inhibit formation sand, prevent formation sand into the wellhole, avoid stuck pump, reduce the work of sand fishing and sand washing.
Brand ERUI
Certification
Lead Time 60days
Guarantee Period 12months
Source of Supply Shandong
Payment Method T/T L/C
Product Introduction
ERFS-1 sand inhibitor is a kind of high-molecular cationic polymer. The cationic group is located on the branch chain of high-molecular polymer, the number of single molecular cations is large, and the degree of cationization is high. Because the cation group is located on the side chain of the polymer chain and has a large degree of freedom of movement, it is easy to contact with sand and clay particles, and form multiple adsorption points with a number of sand and clay particles, thus connecting sand and clay particles into a larger network structure to increase the resistance to formation flow erosion, and greatly improving its ability to prevent the migration of stratum particles.
Product Advantages
There is no need to move the pipe string during construction, and the sand inhibitor can be squeezed into the sand layer from the casing, which is simple and convenient for construction.
Sand inhibitor can well inhibit formation sand, prevent formation sand from entering the wellhole, avoid pump jam, and reduce the work about sande-bailing and sand- washing;
One injection sand inhibitor can prevent formation sand production for 200-300 days.
The technology is applicable to wells with sand content less than 0.2%, which cannot produce normally due to frequent pump inspection by sand.
Generally, the sand inhibitor is prepared into a solution of 10% concentration by using water, and the amount of treatment solution per meter of oil layer is 2.0-2.5m3.
Product Parameters
The technical standards | ERFS-1 |
The molecular weight | >4 million |
Resistance to fluid erosion(cm/min) | 225 |
PH | 7 |
Oilfield water solubility | good |
Recommendations
Power Tong Accessories | Griping Cylinder, P/N:01.04.00M |ZQ203-100
BrandRUSHI
Shaft, P/N: TS-20612-02-33 | HCP/HCP-S Series Pump Parts
BrandTSC
NPS1 CL600 SW Flange
BrandRUNYANG
Float Valve Core|Model"F"|Model"G"
BrandSHUANGJIA
Bearing 6220, P/N: W21106220| LW450×1000-N
BrandXBSY
Tape Measure 3.5m
BrandSHEFFIELD
Gland For Packing Box, P/N:RS78.120-13 |SL450/SL450A
BrandRUSHI
Explosion-protected LED Floodlight with Camera
BrandOKTECH
NPS2 1/2 CL300 SW Flange
BrandRUNYANG
MLJ Series Induction Motor with Variable Frequency Speed Regulation
BrandKEHAIDELONG
Pumping Unit
BrandZYZJ
107.37.01.33 Gasket
BrandLS
Sleeve, Shaft (M.S. Pump), P/N: TS-20943-21 | HCP/HCP-S Series Pump Parts
BrandTSC
Power Tong Accessories | Pin for Jaw, P/N: 19.100-24 | ZQ203-125
BrandRUSHI
PA-4067 Guide Rail Installation Analog Quantity Output Isolator (One-in One-out)
BrandParagon
PA-4112 Guide Rail Installation Switch Quantity Signal Isolator (Two-in Two-out)
BrandParagon
QZ941F DN80 Class150 Integral Ball Valve
BrandCD
LH-B Vulkameter
BrandDERRICK