Explosion- Proof Florescent Lamp
Brand ZM
Certification
Lead Time 15days
Guarantee Period 12months
Source of Supply Shandong
Payment Method T/T L/C
1. Housing of this series of fluorescent lamp is fabricated with extrusion aluminum alloy and die-casting aluminum alloy. Its tensile strength is not lower than 120Mpa and magnesium content is not more than 5% (mass ratio). 2. for emergency fluorescent lamp, a set of emergency device is installed in the lamp. under normal operation condition of external power source, the emergency fluorescent lamp can be used for general lighting and its start/stop is under the control of lighting switch. When internal battery pack of the lamp is in charging state (generally, it can be fully charged after 30h), the lamp can shift to emergency working state within 3s in case of external power failure. at the moment, power of the fluorescent lamp is supplied by battery pack, and one fluorescent tube is lightened. 3. Lamp holder, ballast and emergency device of emergency fluorescent lamp form an entirety, and all wires in the lamp have been connected before delivery. 4. It is convenient to maintain the fluorescent lamp and replace its light source. The transparent shield can be opened by rotating the screwing device. CeY series explosion-proof (emergency) fluorescent lamp (hereinafter referred to as the fluorescent lamp or emergency fluorescent lamp) is designed and manufactured as per the standards in Explosive Atmospheres (GB3836.1~3-2010). It is used in zone 1 and zone 2 in T1~T3 places with explosive gas mixture indoors and outdoors, and it is used for lighting in line of AC 50HZ/60HZ with rated voltage of 220/110V. in case of a sudden power failure, emergency fluorescent lamp can be automatically energized for emergency lighting.
Technical Parameters:
1. Power: 2x40; 2. Voltage: 110/220V; 3. Explosion-proof mark: ExdembⅡBT4 Gb; 4. IP grade: IP66
Recommendations
FQ Series Ball Check Valve
BrandSHUANGJIA
Bearing 6016, P/N: GB/T276| LW450×1000-N
BrandXBSY
Coupling Ø47.6X165, P/N: TS-250CP-02 | HCP/HCP-S Series Pump Parts
BrandTSC
Gear Oil Pump, P/N:AH050102060701, AH050101060601 | BOMCO F-500
BrandKERUI
Power Tong Accessories | Planet Gear Shaft, P/N: 56.330.04 | TQ340-35
BrandRUSHI
VDE Insulated Junior Hacksaw
BrandENDURA
Bumper, P/N: RS78.110.00 | SL450/SL450A
BrandRUSHI
SYD Series Cup Tester
BrandSHUANGJIA
Steel Car Seat 440x360x365mm
BrandENDURA
Power Tong Accessories | Shaft Sleeve, P/N: 02-17M | ZQ203-100
BrandRUSHI
Snap In Tire Valve Installer
BrandENDURA
Magnetic V-Block
BrandENDURA
6.3mm Insulated Screwdriver
BrandENDURA
7.5m3Gantry Crane
BrandWEIHUA
A Type 320 / 80t Double Beam Hook Gantry Crane
BrandWEIHUA
Power Tong Accessories | Die, P/N: 24.100-03|TQ340-35
BrandRUSHI
VDE Insulated Scissor
BrandENDURA
Cover, Inboard Bearing, P/N: TS-20626 | HCP/HCP-S Series Pump Parts
BrandTSC