Hoisting Tools | 18° Center Latch Elevator G Series｜MG 100 STON｜2-3/8～5 IN
18° Center Latch Elevator G Series｜MG 100 STON｜2-3/8～5 IN
Brand RUTONG
Certification
Lead Time 45days
Guarantee Period 12months
Source of Supply Jiangsu
Payment Method T/T L/C
Product Information
18° Center Latch Elevator G Series｜MG 100 STON｜2-3/8～5 IN
Varco BJ “G" type elevators
G series elevators are center latch elevators with 18 degree taper shoulder, applied in handling the drill pipes and drilling tools, etc. The load ranges from 100 tons to 500 tons and the size ranges from 2-3/8 to 6-5/8. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for drilling and production hoisting equipment.
| Model | Size （In） |
Rated Capacity (Short Tons) |
Remarks |
| MG | 2-3/8～5 | 100 | DDZ※-100 |
| RGG | 2-3/8～3-1/2 | 150 | DDZ※-150 |
| MGG | 3-1/2～5-1/2 | 250 | DDZ※-250 |
| GG | 4～5-1/2 | 350 | DDZ※-350 |
| HGG | 4～6-5/8 | 500 | DDZ※-500 |
Recommendations
Round File 10"
BrandENDURA
5/16"Dr. 70L Hex Bits
BrandENDURA
Grip Tools | WA-T Type Safety Clamp
BrandRUTONG
Bits Handle
BrandENDURA
Worm Shaft, P/N: TWPX175-10 ｜ Agitator HA-5.5/HA-7.5/HA7.5-2
BrandTSC
3000 PSI DD Electric Pump Wellhead
BrandLIWEN
YJS Hydraulic Jar Intensifier
BrandSHUANGJIA
Replaceable Urethane Pistons｜Sizes in Millimeters｜With Piston Bore 25.4mm
BrandKERUI
Grade T8 DX Shackle
BrandJ&L
Cast Steel Lift Check Valve
BrandCD
KCP76 Pipe Gas Treatment Compressor
BrandKERUI
Aviation Snips-Left Cut
BrandENDURA
Suction Pump Accessories-pump Barrel Upper Joint
BrandPYZS
Drilling Line∣6*19S-IWRC-EEIP-sZ, Lubricated, Uncoated Finish
BrandJ&L
10" Aviation Tin Snips (Right Elbow)
BrandSHEFFIELD
5000PSI, 2-1/16 '' Christmas Tree
BrandLIWEN
Drilling Line∣6*26WS-IWRC-IPS-sZ, Lubricated, Uncoated Finish
BrandJ&L
Oil Seal of Input Shaft, 95x130x12 ｜ Agitator HA-18.5
BrandTSC
