IG541 mixed gas fire extinguishing system
Brand Sureland
Certification N/A
The IG541 fire extinguishing system achieves the goal of extinguishing by making the comburent unable to maintain combustion, by reducing oxygen concentration in protective zone (reducing from 21% of normal oxygen content to 12.5%). Scope of application: Used to put off fires as follows: Class A - solid surface fire; Class B - inflammable liquid fire; Class E - electrical fire; it is also widely used in sites such as electronic computer room, broadcast communication room and electronic equipment dense area etc., or used in sites such as oil warehouse, library, cultural relics archive library etc.
Technical Parameters:
1. System design nominal pressure: 17.2Mpa; 2. Max. system operating pressure (50℃): 17.2MPa; 3. Container filling pressure (20℃): 15MPa; 4. System min. operating pressure (0℃): 13.6MPa; 5. Storage container capacity: 80L and 90L; 6. Storage filling weight: 211.15Kg/m3; 7. Extinguisher discharge time ≤60s; 8. Storage temperature: 0-50℃; 9. Startup gas: Nitrogen; 10. Startup cylinder filling pressure: 6MPa
Recommendations
Power Tong Accessories | Die, P/N: 01.01-27MC | ZQ203-100
BrandRUSHI
1/4"Dr.50L Phillips Bits
BrandENDURA
5/16"Dr. 70L Slotted Bits
BrandENDURA
Rotating Shaft Assembly, P/N: HNJ5.5-02 | Agitator HA-5.5
BrandTSC
Power Tong | Casing Power Tong|TQ178-16|4~7
BrandRUSHI
Cast Steel Lift Check Valve
BrandCD
Oil Seal of Input Shaft, 65x95x12 | Agitator HA-4
BrandTSC
3000PSI HH PCP Wellhead
BrandLIWEN
9.2 Tons Sprinkling Truck
BrandCLW
F48-70 S-shaped Single Ram Blowout Preventer
BrandSHENKAI
N95 Dust Mask with Filter
BrandKANGSHIELD
3" NPS Pipe Cap
BrandYSDLGJ
10" Tin Snips
BrandSHEFFIELD
FH54-35 Annular Blowout Preventer
BrandSHENKAI
Suction Pump Accessories-internal Thread Plunger Connector
BrandPYZS
Go Through Screwdriver Phillips
BrandENDURA
Straight Cutting Snips
BrandENDURA
1/4"Dr.50L Hex Bits(Metric)
BrandENDURA