Mud Pump｜10-P-130
Brand HRSB
Certification
Lead Time 60days
Guarantee Period 12months
Source of Supply Hebei
Payment Method T/T L/C
Product Information
DESCRIPTION：
Features of Power end in P Series Mud Pumps
- The base of the machine frame adopts one-piece welded structure and the seats of the main bearing and transmission bearing are made of one-piece cast steel. The whole pump has good stiffness and strength.
- The crankshaft adopted a mosaic structure of alloy steel forge with full balance so that it operates very smoothly.
- The pinion shaft is made of an integral structure and belt pulley or chain wheels may be installed on either or both sides of the shaft.
- Roller bearings are installed at both ends of the shaft in order to improve the stability in operation and bearing capacity.
- The gears and crossheads of the bearing are lubricated by splash methods.
- The integral herringbone gear structure is adopted to ensure that the pump operates smoothly.
- The extension rods are connected to the crossheads by pinholes, so as to ensure the concentricity of the pump. The packing adopts quad-layer sealing structure, which realizes good seal performance.
- The hydraulic cylinder is deployed in an L form so as to keep the liquid flow stable and to reduce vibration and pressure fluctuation.
- The combined hydraulic cylinders are interchangeable and may be replaced individually.
- The fast rotary valve cover is easy to remove and install. The cone bolts have a self-locking mechanism that helps to reduce vibration at the valve cover and to ensure the fastening and stability.
- The piston rod and intermediate rod are jointed by clamps, which is easy to remove and replace.
- The combined piston rod allows replacing of pistons without the need to disassemble the liners.
| F Series | P Series | 3NB Series | W Series | PAH Series | TEE Series | Mud Pump-Engine Packages |
| RS-F500 | 8-P-80 | RS-3NB1300 | W-440 | PAH-350 | TEE-300 | |
| RS-F800 | 9-P-100 | RS-3NB1600 | W-446 | |||
| RS-F800FT | 10-P-130 | W-447 | ||||
| RS-QF800 | 12-P-160 | |||||
| RS-F1000 | RS-P1600HL | |||||
| RS-F1300 | ||||||
| RS-F1300L | ||||||
| RS-F1300FT | ||||||
| RS-F1600 | ||||||
| RS-QF1600 | ||||||
| RS-F1600HL | ||||||
| RS-QF1600HL | ||||||
| RS-F1600FTL |
Manufacturing and Examination Equipment
Recommendations
6pcs. Engineering Drills Set
BrandENDURA
4"NPS Butt Welded Straight Cross
BrandRUNYANG
6-1/2" Double-color Stainless Steel Scissors
BrandSHEFFIELD
Mud Pump Valve Spring
BrandKERUI
Drilling Line∣6*19S-IWRC-IPS-sZ, Lubricated, Uncoated Finish
BrandJ&L
7" Tin Snips
BrandSHEFFIELD
27x36mm Rectangular Ring End Fitting
BrandENDURA
32pc. Thread Taps Set
BrandENDURA
Standard Oil-injected Screw Air Compressor
BrandDENAIR
1/2 In. L-handle
BrandSHEFFIELD
1/4" Dr. 25l Torx Bits
BrandENDURA
20-175THC Tubing Pump
BrandFUQIAO
Spinner Handle
BrandENDURA
Upper Impeller Assembly, P/N: HNJ18.5-04 ｜ Agitator HA-18.5
BrandTSC
9*12mm Rectangular Open End Fitting
BrandENDURA
(Carbon Steel) No Leakage WaferCheck Valve
BrandCD
9*12mmrectangular Open End Fitting
BrandENDURA
QYZ Hydraulic Drilling Jar
BrandSHUANGJIA
